5 Best In-ceiling Speakers For Dolby Atmos Home Theatre

best in-ceiling speaker

Best In-ceiling Speakers For Dolby Atmos Home Theatre

Here we present the highest rated In ceiling speakers For Dolby Atmos Home Theatre with Pros, Cons, features which helps you for a comparison and reaching the best out of it.

Installing in-ceiling speakers has always been a trend that has been penetrated into domestic uses. Some time ago, the speakers embedded in the ceiling was more seen in leisure facilities and services, such as hairdressers, supermarkets, department stores or waiting rooms, but today this trend has come to houses also.

For many decorators, implementing sound on the ceiling is a necessity given the great demand for modern and minimalist spaces that are being built today. This is due to the need to save space and gain a few meters to the room in question, some do it for purely aesthetic reasons and others choose this option to be able to better distribute the furniture in the room with one less piece, thus offering a cleaner and clearer space.

Here we list the best Dolby Atmos ceiling speakers for true surround sound and home theater system.

POLK AUDIO RC80i – The Best Ceiling Speakers for Atmos

One of the favorite product for many audiophiles is Polk Audio RC80i because of its spectacular stereo sound and its saves your floor space because of its ceiling nature.

The RC80i provides theatre quality sound effects with a feel of moving up and down.It comprises of one-inch ring tweeter with a 15-degree swivel mount.It also equipped with durable polymer composite cone for the surrounds and an eight pinch dynamic balance. The performance of the tweeter is extremely good. It gives clarity and balanced sound to the entire room. A high-frequency response of 35Hz- 20 kHz is provided by 8-inch woofer, which gives clean and smooth crisp high sounds.


  • Crystal clear, high definition sound.
  • 8-inch woofer provides fairly decent bass.
  • Rust and moisture resistant material, high durability.
  • Easy installation.
  • Lifetime warranty.


  • Price is a little steep.
  • Open back, which can be a problem with ceilings that have blown insulation above.

The RC80i weighs 4.3 pounds with a dimension of 12.1 inches by 11.8 inches by 9.8 inches. The maximum output is 50 watts with a response bandwidth of 35-20,000 Hz. The mounting depth is 3.5 inches.

RC80i possess speakers with a lifetime warranty and provide crystal clear sounds. Because of its lifetime warranty, if you face any hardware issues, Polk Audio will replace it.

The RC80i can be very easily installed in a hole in the wall and drop the wires and speakers in. It comes up with whitish in nature so that it will definitely suit your wall. It is designed against moisture and rust so that it can be used in moisture-filled areas without any hesitation.

Latest Price & User Reviews



Pyle PDIC60T is bracketed into the best-budgeted category of ceiling speakers. It delivers excellent stereo sound to your room without affecting the floor space. The speakers of PDIC series feature 70-volt trans handling capability, high-efficiency response rates, and high-temperature voice coils which enhances clear and rich sounds.

The PYLE PDIC60T weights 6.09 lbs with an overall dimension of 9” diameter 4 5/8” depth. The cut-out dimensions are 7 7/8”diameter4 5/8” depth. The midbass speaker is 6.5” and the impedance is 8 ohm. It comes up with 2-way stereo sound speakers and 70-volt transformer tapping at 8 ohms.

The frequency response is 65 Hz to 22 kHz and the peak power is 250 W. It is built with direct able1” Titanium dome tweeter. The PYLE PDIC60T is perfect for custom installations and includes cut-out template for easy installation.


  • Simple design.
  • Decent sound quality.
  • Affordable.
  • Plug and play installation.


  • The range of the tweeter could be better.
  • Heavier in comparison.

With 1-inch titanium dome tweeter which can handle high temperature and has high-efficiency response rate, which gives the massive control the music. You can hear every little pitch and the sound output of PDIC60T is high and loud. It comes up with the option of adjustable treble control.

Related Read: Building Home Theater – Choose the Right Soundbar FAQ

Another important feature of PDIC60T is it is not at all complicated for setup and installation. You only need to have a 10-inch hole, So that the speakers fit in perfectly.

One of the best-budget ceiling speakers with adorable features it satisfies your demands.

Latest Price & User Reviews

BOSE 742898-0200 INVISIBLE 591 – Best Ceiling Speaker Under 500


  • Easy installation.
  • Grills are magnetically attached and are easy to paint.
  • Single 5” woofer and two strategically positioned ¾” tweeters.
  • Fast and easy installation through standard hardware.

BOSE 742898-0200 is special in its design with round virtually invisible in-ceiling speakers.Its design is of acoustic in nature which allows full sound coverage and the placement option can be increased due to its smaller size. The balanced stereo sound is provided with exclusive BOSE stereo speakers.it is sold as a pair.

BOSE 742898-0200 weighs 3.2 lbs (1.5 kg) per speaker and a dimension of 6.5 3.8”(166.096.7 mm) per speaker. The grille diameter is 8.1” (206.0 mm) and the cutout diameter is 6.7” (170.0 mm).It comes with 2 speakers, 2 speaker grilles, and template /paint shield. It provides an impedance of 4 to 8 ohm at a power rating from 10 to 100 W per channel. The continuous power output is 50 W at 8 ohms. It consists of standard dogleg clamps which helps the installation quick and easy.

The brand image makes you cent percent go for BOSE 742898-0200 and it delivers your demands. With 5” single woofer and two tweeters, it provides crisp and clear sounds. The acoustic design is another exclusive feature.

Latest Price & User Reviews


KLIPSCH’S CDT-5800-C is another highly demanded product in the market for its high performance. It is coming up with the controlled dispersion technology in both high and low frequencies of CDT-5800-C can be directed towards listening area.


  • Easily paintable to blend with the ceiling.
  • Treble and midbass attenuation switches
  • High sensitivity and power handling.

CDT-5800-C is available the with a white finish and is paintable. It is incorporated with 1-inch titanium tweeter mated to a swiveling 100-degree Tractrix horn. It is specially designed to produce more output using less energy which increases the efficiency of the speaker. The woofer is 8-inch cerametallic and has got great positioning capabilities.360-degree full rotation can be done easily and it shifts 15 degrees in any direction which help them in complete control of the sound. Another feature is the premium network and treble and bass contour switches enhance audio excellence.

Related Read: Best Wireless Multi-room Speaker System from Cheap to High End

It comes with a weight of 7.4 lbs (3.4 kg) and a diameter 11”. The mounting depth is 5.4” and cut out dimension is 9.8”.Nominal impedance is 8 ohms and a crossover frequency of 2230 Hz. The power is 50 watts to 200 watts peak and a frequency response of 49Hz-20 kHz.

Latest Price & User Reviews


Ceiling speakers became more popular nowadays.KLIPSCH designed CDT-5650C II to meet the demands for high performance. It contains patent-pending gimbal mechanism which is known as Controlled Dispersion Technology (CDT), which helps the high frequency and low-frequency sounds from the system can be directed towards listening area. More reflected and accurate sounds are produced with titanium compression driver than another typical dome tweeter. The cerametallic woofer of 6.5- inch can rotate a full 360 degrees and is able to shift15 degrees to any direction which helps in the control of sound.

The High frequency and smoothness are increased with the addition of a linear travel suspension to the tweeter. It possesses treble and midbass attenuation switches and the acoustic output is increased with the help of Horn-loaded technology and significantly reduces distortion.

It weighs 7 lbs and a diameter of 9.5’’.The cut-out dimension is 8.3’’ and with a mounting depth of 4.5”.The power range varies between 50W RMS to 200Wpeak variation.The recommended amplifier power is 100W.The frequency response is 60Hz to 23 kHz, and a crossover frequency of 2440 Hz. The nominal impedance is 8 ohms. Manufacturer provides a two-year warranty for loudspeaker driver, crossovers and cabinets and a two-year warranty for amplifier electronics.

Latest Price & User Reviews

Leave a Comment